Since 2007JCK Blue MetalsBUILD OUR DREAMS

OUR PRODUCTS & PRICES

Materials for every stage.

Prices in Indian rupees per metric tonne.
GST 5% extra.

Gravel

₹210–280per metric tonne

GST 5% extra

Size / grading reference
4.75–80 mm gravel fraction (classification reference; supplied blend to be confirmed)
About
Granular material for fill and foundation preparation. Discuss the intended layer and compaction requirements before ordering.
Typical uses
Site filling; access tracks; specified foundation layers
Standard references
IS 1498:1970
Soil classification reference.
IS 2720 (Part 4):1985
Grain-size test method.
Request a quotation

M sand

₹670–700per metric tonne

GST 5% extra

Size / grading reference
Fine aggregate, predominantly passing the 4.75 mm sieve; grading zone to be confirmed
About
Manufactured sand produced by crushing and processing rock for use as fine aggregate in approved concrete mixes.
Typical uses
Concrete mixes; general construction
Standard references
IS 383:2016
Fine aggregate specification for concrete.
Request a quotation

P sand

₹750–850per metric tonne

GST 5% extra

Size / grading reference
Plaster sand grading: 95–100% passing the 2.36 mm sieve
About
Fine manufactured sand intended for plastering and mortar work. Confirm the required fineness for your finish.
Typical uses
Wall plastering; mortar preparation; surface finishing
Standard references
IS 1542:1992
Sand for plaster specification.
Request a quotation
RR Chekkai

RR Chekkai

₹260–280per metric tonne

GST 5% extra

Size / grading reference
150–200 mm (JCK supplied size)
About
Large rough stone boulders for rubble work and other applications specified by the project engineer.
Typical uses
Rubble masonry; retaining structures; specified protection works
Standard references
IS 1121 (Part 1):2023
Compressive-strength test method for natural stone.
IS 1597 (Part 1):1992
Rubble masonry application code.
Request a quotation

6mm

₹650–670per metric tonne

GST 5% extra

Supplied size
6 mm
About
Small crushed aggregate
Typical uses
Precast products and approved concrete mixes
Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

12mm

₹620–640per metric tonne

GST 5% extra

Supplied size
12 mm
About
Crushed aggregate
Typical uses
Concrete mixes and precast work
Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

20 mm

₹660–680per metric tonne

GST 5% extra

Supplied size
20 mm
About
Crushed aggregate
Typical uses
Structural concrete where the mix design specifies this size
Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

24 mm

₹660–680per metric tonne

GST 5% extra

Supplied size
24 mm
About
Crushed aggregate
Typical uses
Concrete and construction mixes specified for this size
Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

40 mm

₹660–680per metric tonne

GST 5% extra

Supplied size
40 mm
About
Larger crushed aggregate
Typical uses
Mass concrete and base work where specified
Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

30 mm

₹660–680per metric tonne

GST 5% extra

Crushed aggregate supplied in 30 mm size. Confirm grading and suitability for your project.

Standard references
IS 383:2016
Coarse aggregate specification for concrete.
Confirm the supplied size against the required sieve grading.
Request a quotation

Wetmix

₹490–520per metric tonne

GST 5% extra

Size / grading reference
WMM reference: 100% passing 53 mm and 95–100% passing 45 mm
About
A graded aggregate blend prepared with water for specified road pavement layers. The mix and moisture requirements depend on the project.
Typical uses
Road base work; pavement preparation; specified access roads
Standard references
IS 2386 (Part 1):1963
Aggregate size and shape test methods.
MoRTH Clause 406
Wet-mix macadam roadwork specification.
Request a quotation

GSB

₹260–280per metric tonne

GST 5% extra

Size / grading reference
Grading-dependent upper sieve: 75 mm or 53 mm. Confirm the contract grading.
About
Granular Sub-base: graded granular material for specified road foundation layers. Confirm the blend and project specification with our team.
Typical uses
Road foundation layers; pavement support
Standard references
IS 2720 (Part 4):1985; IS 2720 (Part 16):1987
Grain-size and CBR test methods.
MoRTH Clause 401
Confirm the specified GSB grading for the supplied blend.
Request a quotation

Standard references identify applicable specifications, classifications or test methods. Confirm the required grading and test results for your order.

Confirm grading, stock availability, delivery charges and suitability before ordering.